Become a dealer Shop

Our production

Almost any roof needs an assistant so that it can fully perform its functions. Runoff water has a devastating effect on the walls, blind area and foundation of the building, and also collects in puddles and erodes paths.

RainWay drainage systems, developed in Ukraine, effectively solve the problem of removing rain and melt water from roofs:

  • Mansions, garages and gazebos;
  • Residential and office buildings;
  • Industrial facilities;

and other buildings.

RainWay gutter systems are offered in two standard sizes:

The set of elements of the RainWay 90 and RainWay 130 systems is designed in such a way that it allows you to assemble a complete system for a roof of any configuration and, if necessary, can be connected to a surface drainage system and storm sewers.

The design and color scheme of the gutters are perfectly combined with all types of roofing materials, and are the correct roof completion not only from the technical, but also from the architectural side.

Houses with a roof area of ​​more than 100 m 2 , but no more than 5 floors
  • Gutter section: 130 mm
  • Pipe diameter: 100 mm
Small architectural forms - gazebos, porches, garages, as well as houses with a roof area of ​​less than 100 m 2
  • Gutter section: 90 mm
  • Pipe diameter: 75 mm
Choose color:
scheme scheme scheme scheme scheme scheme scheme scheme

The elements of the drainage system are connected to each other using rubber seals, without the use of glue.

High quality raw materials, modern equipment and innovative design developments make possible long-term, efficient operation of RainWay gutter systems.

Color matching Calculation of the drain

RainWay Rubber Seals

The tightness of the RainWay gutter connection for many years is achieved by using rubber seals.

RainWay gutter rubber seals are made of closed cell EPDM rubber, which features good aging resistance, ozone resistance, low cure at low temperatures and excellent sealing properties.

Its service life is more than 50 years at a temperature of use - from -40 ° to + 60 ° C.

The main characteristics of gutters and spotlights of our production:

  • Material (fittings, moldings) PVC (PVC-U)
  • Manufacturing technology Co-extrusion (Co-Ex)
  • Panel / Profile Length 3 m
  • Length of pipes / gutters 1m, 2m, 3m
  • RainWay 90 pipe diameter 75mm
  • RainWay 130 pipe diameter 100 mm
  • Width of RainWay 90 90 mm
  • Width of RainWay 130 130 mm

Physical data of seals:

  • Polymer type Ethylene-Propylene-Diene
  • Shore strength 50-65
  • Water absorption Max 1%
  • Cure after heat aging Max 10%
  • Compression in 24 hours @ 100 ° C Max 50%
  • Density g / cm 0.25 - 0.60
  • Ozone Resistant Fully resilient
  • Aging with oxygen Fully resilient

RainWay Certificates