Become a dealer Shop

Our production

Almost any roof needs an assistant so that it can fully perform its functions. Runoff water has a devastating effect on the walls, blind area and foundation of the building, and also collects in puddles and erodes paths.

RainWay drainage systems, developed in Ukraine, effectively solve the problem of removing rain and melt water from roofs:

  • Mansions, garages and gazebos;
  • Residential and office buildings;
  • Industrial facilities;

and other buildings.

RainWay gutter systems are offered in two standard sizes:

The set of elements of the RainWay 90 and RainWay 130 systems is designed in such a way that it allows you to assemble a complete system for a roof of any configuration and, if necessary, can be connected to a surface drainage system and storm sewers.

The design and color scheme of the gutters are perfectly combined with all types of roofing materials, and are the correct roof completion not only from the technical, but also from the architectural side.

Houses with a roof area of ​​more than 100 m 2 , but no more than 5 floors
  • Gutter section: 130 mm
  • Pipe diameter: 100 mm
Small architectural forms - gazebos, porches, garages, as well as houses with a roof area of ​​less than 100 m 2
  • Gutter section: 90 mm
  • Pipe diameter: 75 mm
Choose color:
scheme scheme scheme scheme scheme scheme scheme scheme

The elements of the drainage system are connected to each other using rubber seals, without the use of glue.

High quality raw materials, modern equipment and innovative design developments make possible long-term, efficient operation of RainWay gutter systems.

Color matching Calculation of the drain

RainWay Rubber Seals

The tightness of the RainWay gutter connection for many years is achieved by using rubber seals.

RainWay gutter rubber seals are made of closed cell EPDM rubber, which features good aging resistance, ozone resistance, low cure at low temperatures and excellent sealing properties.

Its service life is more than 50 years at a temperature of use - from -40 ° to + 60 ° C.

The main characteristics of gutters and spotlights of our production:

  • Material (fittings, moldings) PVC (PVC-U)
  • Manufacturing technology Co-extrusion (Co-Ex)
  • Panel / Profile Length 3 m
  • Length of pipes / gutters 1m, 2m, 3m
  • RainWay 90 pipe diameter 75mm
  • RainWay 130 pipe diameter 100 mm
  • Width of RainWay 90 90 mm
  • Width of RainWay 130 130 mm

Physical data of seals:

  • Polymer type Ethylene-Propylene-Diene
  • Shore strength 50-65
  • Water absorption Max 1%
  • Cure after heat aging Max 10%
  • Compression in 24 hours @ 100 ° C Max 50%
  • Density g / cm 0.25 - 0.60
  • Ozone Resistant Fully resilient
  • Aging with oxygen Fully resilient

RainWay Certificates

INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90° INTERNAL GUTTER ANGLE 90°
INTERNAL GUTTER ANGLE 90°
It is used for a change in direction of the gutter on internal corners of the roof
HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION HORIZONTAL BRACKET EXTENSION
HORIZONTAL BRACKET EXTENSION
It is used to fasten the gutter brackets when there is no fascia board, it is fastened on the roof boarding
INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135° INTERNAL GUTTER ANGLE 135°
INTERNAL GUTTER ANGLE 135°
Establish on the inner pads of the cover and the signs for the establishment of jockeys along the 135 ° kut with a snake right next to the water.
EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135° EXTERNAL GUTTER ANGLE 135°
EXTERNAL GUTTER ANGLE 135°
Installed at the outer corners of the roof and designed to connect gutters at 135 ° to change direction movement of water.
SOCKET BEND single 87° SOCKET BEND single 87° SOCKET BEND single 87° SOCKET BEND single 87° SOCKET BEND single 87° SOCKET BEND single 87° SOCKET BEND single 87° SOCKET BEND single 87° SOCKET BEND single 87° SOCKET BEND single 87° SOCKET BEND single 87°
SOCKET BEND single 87°
Designed to provide transition from funnel to pipe. They are also used to bypass architectural elements of the facade. Angle 87 °
SOCKET BEND double 87° SOCKET BEND double 87° SOCKET BEND double 87° SOCKET BEND double 87° SOCKET BEND double 87° SOCKET BEND double 87° SOCKET BEND double 87° SOCKET BEND double 87° SOCKET BEND double 87° SOCKET BEND double 87° SOCKET BEND double 87°
SOCKET BEND double 87°
Designed to provide transition from funnel to pipe. They are also used to bypass architectural elements of the facade. Angle 87 °
TEE TEE TEE TEE TEE TEE TEE TEE TEE TEE TEE
TEE
Designed for connecting pipes at an angle of 67°
SCREW WITH DOWEL SCREW WITH DOWEL SCREW WITH DOWEL SCREW WITH DOWEL SCREW WITH DOWEL SCREW WITH DOWEL SCREW WITH DOWEL SCREW WITH DOWEL SCREW WITH DOWEL SCREW WITH DOWEL SCREW WITH DOWEL
SCREW WITH DOWEL
Screw-screw with dowel for installation of drainage systems.
EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90° EXTERNAL GUTTER ANGLE 90°
EXTERNAL GUTTER ANGLE 90°
It is used for a change in direction of the gutter on external corners of the roof
GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER
GUTTER
It is designed for collecting water from the roof.
GUTTER UNION GUTTER UNION GUTTER UNION GUTTER UNION GUTTER UNION GUTTER UNION GUTTER UNION GUTTER UNION GUTTER UNION GUTTER UNION GUTTER UNION
GUTTER UNION
It is used for joining two gutters.
GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER
GUTTER
It is designed for collecting water from the roof.
GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET GUTTER FASCIA BRACKET
GUTTER FASCIA BRACKET
It is used for fastening the gutter to the fascia board
GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER
GUTTER
It is designed for collecting water from the roof.
RUNNING OUTLET RUNNING OUTLET RUNNING OUTLET RUNNING OUTLET RUNNING OUTLET RUNNING OUTLET RUNNING OUTLET RUNNING OUTLET RUNNING OUTLET RUNNING OUTLET RUNNING OUTLET
RUNNING OUTLET
It carries the water from the gutter into the downpipe
GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER GUTTER
GUTTER
It is designed for collecting water from the roof.
SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67°
SOCKET BEND double 67°
It will help redirect the water from the running outlet to the downpipe, it ends the downpipe from the bottom
DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M
DOWNPIPE 85, 3M
It carries the water from a running outlet
SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67° SOCKET BEND double 67°
SOCKET BEND double 67°
It will help redirect the water from the running outlet to the downpipe, it ends the downpipe from the bottom
DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M
DOWNPIPE 85, 3M
It carries the water from a running outlet
DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR DOWNPIPE CONNECTOR
DOWNPIPE CONNECTOR
It joins two downpipes or a downpipe and a running outlet
DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M DOWNPIPE 85, 3M
DOWNPIPE 85, 3M
It carries the water from a running outlet
DOWNPIPE BRACKET DOWNPIPE BRACKET DOWNPIPE BRACKET DOWNPIPE BRACKET DOWNPIPE BRACKET DOWNPIPE BRACKET DOWNPIPE BRACKET DOWNPIPE BRACKET DOWNPIPE BRACKET DOWNPIPE BRACKET DOWNPIPE BRACKET
DOWNPIPE BRACKET
It fastens the downpipe to a house wall
SOCKET BEND single 67° SOCKET BEND single 67° SOCKET BEND single 67° SOCKET BEND single 67° SOCKET BEND single 67° SOCKET BEND single 67° SOCKET BEND single 67° SOCKET BEND single 67° SOCKET BEND single 67° SOCKET BEND single 67° SOCKET BEND single 67°
SOCKET BEND single 67°
Designed to provide transition from funnel to pipe. They are also used to bypass architectural elements of the facade. Angle 67 °